Ga door naar hoofdinhoud

Inleiding

This guide will serve as a step-by-step guide for speaker replacement.

Onderdelen

Geen onderdelen opgegeven.

  1. Using a separating tool, look for a seam in the plastic casing that looks most accessible. Use the prying tool to separate the front and back casing, working your way around the perimeter.
    • Using a separating tool, look for a seam in the plastic casing that looks most accessible.

    • Use the prying tool to separate the front and back casing, working your way around the perimeter.

    • Utilize a card tool or a pick to assist in keeping the case separated.

    • To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.

  2. Flip over the back of the device while keeping it close to the front, the speaker is attached to it.
    • Flip over the back of the device while keeping it close to the front, the speaker is attached to it.

    • Remove the yellow tape securing the speaker to the back casing.

  3. Use the separating tool to pry the speaker from its surface. Use caution when removing the speaker, you may damage the screen.
    • Use the separating tool to pry the speaker from its surface.

    • Use caution when removing the speaker, you may damage the screen.

    • Cut or desolder the wires to replace or repair the speaker.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Dayne Russell

Lid sinds: 27-01-15

401 Reputatie

4 handleidingen geschreven

Team

Pasco Hernando, Team 1-1, Prince Winter 2015 Lid van Pasco Hernando, Team 1-1, Prince Winter 2015

PHSC-PRINCE-W15S1G1

6 Leden

10 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 680