Ga door naar hoofdinhoud

Inleiding

This guide will instruct on how to replace a malfunctioning Viewfinder assembly on the RCA CC310.

Onderdelen

Geen onderdelen opgegeven.

  1. RCA CC310 Viewfinder Replacement, Viewfinder: stap 1, afbeelding 1 van 2 RCA CC310 Viewfinder Replacement, Viewfinder: stap 1, afbeelding 2 van 2
    • Slide a spudger between the plastic rail and the metal tab on the left side of the rail. Push away from the camcorder to release the flap.

    • Pushing the viewfinder assembly to the right makes lifting the flap easier.

    • Slide the lifted flap towards the viewfinder assembly until the viewfinder is free from the rail.

  2. RCA CC310 Viewfinder Replacement: stap 2, afbeelding 1 van 3 RCA CC310 Viewfinder Replacement: stap 2, afbeelding 2 van 3 RCA CC310 Viewfinder Replacement: stap 2, afbeelding 3 van 3
    • Unscrew the 7mm ph#0 screw on the underside where the cable connects.

    • Lift the plastic where the cable connects off of the viewfinder assembly.

    • Disconnect the cable inside by pulling it apart.

  3. RCA CC310 Viewfinder Replacement: stap 3, afbeelding 1 van 2 RCA CC310 Viewfinder Replacement: stap 3, afbeelding 2 van 2
    • Unscrew two 7.0mm ph#0 screws on the underside of the viewfinder assembly.

    • Lift the viewfinder plastic assembly up and remove.

  4. RCA CC310 Viewfinder Replacement: stap 4, afbeelding 1 van 1
    • Flip back the viewfinder access tab.

    • Unscrew the 7.0mm ph #0 screw next to the mirror.

  5. RCA CC310 Viewfinder Replacement: stap 5, afbeelding 1 van 3 RCA CC310 Viewfinder Replacement: stap 5, afbeelding 2 van 3 RCA CC310 Viewfinder Replacement: stap 5, afbeelding 3 van 3
    • Lift off both sides of the plastic assembly.

    • When reassembling, if the housing doesn't connect properly, try turning the focus wheel.

  6. RCA CC310 Viewfinder Replacement: stap 6, afbeelding 1 van 2 RCA CC310 Viewfinder Replacement: stap 6, afbeelding 2 van 2
    • Lift the microphone circuit board straight up.

    • Unclip the cable connected to the circuit board.

  7. RCA CC310 Viewfinder Replacement: stap 7, afbeelding 1 van 3 RCA CC310 Viewfinder Replacement: stap 7, afbeelding 2 van 3 RCA CC310 Viewfinder Replacement: stap 7, afbeelding 3 van 3
    • Lift plastic housing and guide the wires from underneath.

    • Lift out the entire circuit board and viewfinder.

    • Replace entire circuit board and viewfinder assembly.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Oliver Adams

Lid sinds: 19-01-11

629 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 5-20, Amido Winter 2011 Lid van Cal Poly, Team 5-20, Amido Winter 2011

CPSU-AMIDO-W11S5G20

4 Leden

7 handleidingen geschreven

Één opmerking

do you know where i can find a relacement one of these parts

Connor Byrley - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 13

Altijd: 2,065