Repareer je spullen Gemeenschap Winkel

Protocol Galileo Stealth Propeller Replacement

Inleiding

This guide will walk you through how to remove the motor propeller from the drone. This is a very simple process, and minimal tooling is required. This guide is useful for replacing blades that may have been damaged.

Wat je nodig hebt

  1. Protocol Galileo Stealth Propeller Replacement, Propeller: stap 1, afbeelding 1 van 1

    • Remove the chrome shaft cover by lightly pulling it away from the drone.

    Vertaal

  2. Protocol Galileo Stealth Propeller Replacement: stap 2, afbeelding 1 van 1

    • Using a Phillips #000 screwdriver, remove the 7mm screw from the propeller stop.

    • Be sure to apply adequate pressure when removing the screw to prevent stripping it out.

    Vertaal

  4. Protocol Galileo Stealth Propeller Replacement: stap 3, afbeelding 1 van 1

    • Remove the propeller stop from shaft by lightly pulling it away from the drone.

    Vertaal

  5. Protocol Galileo Stealth Propeller Replacement: stap 4, afbeelding 1 van 1

    • Remove the propeller from shaft by lightly pulling it away from the drone.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

stephen R masalewicz

Lid sinds: 02/15/18

270 Reputatie

2 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

UW Stout, Team S8-G4, Ogden Spring 2018 Lid van UW Stout, Team S8-G4, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G4

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 6

Altijd: 368