Prerequisite Exterior Housing Disassembly

Deze versie kan foutieve bewerkingen bevatten. Schakel over naar de recentste gecontroleerde momentopname.

Wat je nodig hebt

Deze stap is niet vertaald. Help het te vertalen

Gereedschap gebruikt in deze stap:

iOpener

$19.99

Koop

Pry the exterior housing off the iHome iP37. You may need extra leverage to do this.
Note: This step is the most difficult due to the way it is attached. The glue holding the exterior housing to the internals does not break easily. You may want to use iFixit's iOpener to soften the glue.
Note: The process is the same for both the upper half and the lower half. To identify the halves, look for these details: the upper half has a metal grid, and the lower half has buttons. If you are replacing any other components, pry off the lower half.