Ga door naar hoofdinhoud

Inleiding

Replacing this keyboard is easy and takes only a few minutes.

Gereedschap

Geen gereedschap opgegeven.

Onderdelen

  1. PowerBook G4 Titanium DVI Keyboard Replacement, Battery: stap 1, afbeelding 1 van 2 PowerBook G4 Titanium DVI Keyboard Replacement, Battery: stap 1, afbeelding 2 van 2
    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

  2. PowerBook G4 Titanium DVI Keyboard Replacement, Keyboard: stap 2, afbeelding 1 van 1
    • Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  3. PowerBook G4 Titanium DVI Keyboard Replacement: stap 3, afbeelding 1 van 1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  4. PowerBook G4 Titanium DVI Keyboard Replacement: stap 4, afbeelding 1 van 1
    • Your laptop should look approximately like this.

Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Bijgevoegde documenten

iRobot

Lid sinds: 24-09-09

1 Reputatie

646 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 17

Altijd: 10,450