Inleiding

My RAM configuration may differ from yours, but the process is exactly the same.

Gereedschap

Geen gereedschap nodig.

Onderdelen

  1. Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Voeg opmerking toe

  2. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
  3. Push the white tabs next to where your RAM is located away form the RAM chip itself.
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

      • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

    Voeg opmerking toe

    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Lid sinds: 28-08-18

14.662 Reputatie

22 handleidingen geschreven

Team

NIWOTech Lid van NIWOTech

Community

0 Leden

0 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 27

Altijd: 60