Gereedschap

Geen gereedschap nodig.

Onderdelen

  1. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Voeg opmerking toe

  2. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
  3. Locate the PRAM battery.
    • Locate the PRAM battery.

    • The PRAM battery is usually at the top right corner of the logic board.

    Voeg opmerking toe

    • Lift the battery out of the PRAM battery holder.

      • What I did to free the PRAM battery is I broke the plastic battery holder identical to the circled one on the other side of the PRAM battery, then I was able to free the PRAM battery. I couldn't get the PRAM battery to budge without breaking the holder.

      • Don't be worried, breaking the plastic holder won't cause much damage nor will it hinder the ability for the PRAM battery to stay in place. Only break one holder, though.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Lid sinds: 28-08-18

14.734 Reputatie

22 handleidingen geschreven

Team

NIWOTech Lid van NIWOTech

Community

0 Leden

0 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 19

Altijd: 45