Repareer je spullen Gemeenschap Winkel

Porter-Cable 382 Sander Pad Replacement

Wat je nodig hebt

  1. Porter-Cable 382 Sander Pad Replacement, Sander Pad: stap 1, afbeelding 1 van 1

    • When changing the sander pad, be sure to rotate the sander upside down so the pad and three highlighted screws are facing upward toward you.

    • Once the sander is upside down begin by removing your old sandpaper.

    • Once the sandpaper is removed locate the three screws on your sander pad.

    Vertaal

  3. Porter-Cable 382 Sander Pad Replacement: stap 2, afbeelding 1 van 1

    • Remove the three, (star bolt) screws with the iFixit screw driver with a "T20" head. Be sure to hold the pad of the sander as it will rotate as you try to loosen the screws.

    • Once the screws are removed pull upward toward you and the sander pad will come apart from the device.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Nick O'Sadcia

Lid sinds: 03/11/16

421 Reputatie

3 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

UMass Dartmouth, Team 8-7, Botvin Spring 2016 Lid van UMass Dartmouth, Team 8-7, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G7

3 Leden

4 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 1,769