Inleiding

Make sure laptop is powered off when working on the device. Be cautious not to damage the new screen as it may be delicate. The plastic frame around the screen is flimsy and may crack if it is not handled with care.

Onderdelen

Geen onderdelen nodig.

  1. Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.
    • Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.

    Voeg opmerking toe

  2. Remove two 3mm screws with a Phillips #000 screwdriver.
    • Remove two 3mm screws with a Phillips #000 screwdriver.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Wedge a blue plastic opening tool between the screen and the frame to free the screen.

    • Do not fully remove screen as it is still attached by connector cable on bottom

    Voeg opmerking toe

    • Disconnect the display cable with your fingers to fully remove the screen from the device.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tanner Krygier

Lid sinds: 17-09-18

857 Reputatie

5 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 10

Afgelopen 30 Dagen: 24

Altijd: 33