Repareer je spullen Gemeenschap Winkel

Polycom SoundStation Back Housing Replacement

Inleiding

Taking off the back of this phone will allow you to look at or replace all of the pieces inside this device. This is a prerequisite guide for any other replacement you would like to accomplish with your SoundStation.

Wat je nodig hebt

  1. Polycom SoundStation Back Housing Replacement, Back Housing: stap 1, afbeelding 1 van 1

    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

    Bewerken

  3. Polycom SoundStation Back Housing Replacement: stap 2, afbeelding 1 van 2 Polycom SoundStation Back Housing Replacement: stap 2, afbeelding 2 van 2

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Cali Nowak Credit

Lid sinds: 09/02/14

431 Reputatie

4 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 Lid van USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014

USFSM-STEWART-F14S1G3

3 Leden

14 handleidingen geschreven

Één opmerking

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 6

Altijd: 1,153