Ga door naar hoofdinhoud

Inleiding

This guide is intended for users who have Polaroid Z2300 with a malfunctioning control panel.

Onderdelen

Geen onderdelen opgegeven.

  1. Locate and remove the two 2.5 mm long screws on the bottom of the camera. Screw head: JIS J00 The screws are very small, be careful not to strip or lose them!
    • Locate and remove the two 2.5 mm long screws on the bottom of the camera.

    • Screw head: JIS J00

    • The screws are very small, be careful not to strip or lose them!

  2. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  3. Once the two screws are removed, flip the camera to back side up. Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed. Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed.
    • Once the two screws are removed, flip the camera to back side up.

    • Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed.

  4. Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove. Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove.
    • Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Bradley Marcum

Lid sinds: 01-11-18

217 Reputatie

2 handleidingen geschreven

Team

IUPUI, Team S2-G1, Harley Fall 2018 Lid van IUPUI, Team S2-G1, Harley Fall 2018

IUPUI-HARLEY-F18S2G1

3 Leden

2 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 92