Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Replacing a broken or scratched lens on a Polaroid Sun 600 LMS.

  1. Move film door slide on the left side of camera forward. Pull film door open.
    • Move film door slide on the left side of camera forward.

    • Pull film door open.

  2. Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place. If your camera is old or dirty, it may take more force to open the flash assembly.
    • Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.

    • If your camera is old or dirty, it may take more force to open the flash assembly.

  3. SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

    SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits
  4. Use a spudger on each side to separate the flash segment from the main body. Be careful not to do this too hard because you may pull out the connecting wires.
    • Use a spudger on each side to separate the flash segment from the main body.

    • Be careful not to do this too hard because you may pull out the connecting wires.

  5. Use several plastic opening tools around the edges of the camera's body to separate it from the plastic frame. Use several plastic opening tools around the edges of the camera's body to separate it from the plastic frame.
    • Use several plastic opening tools around the edges of the camera's body to separate it from the plastic frame.

  6. Place left hand on the gray section and right hand on the black section. Pull the sections apart.
    • Place left hand on the gray section and right hand on the black section.

    • Pull the sections apart.

  7. Carefully remove the damaged lens from the interior of the camera. Replace with a new lens.
    • Carefully remove the damaged lens from the interior of the camera.

    • Replace with a new lens.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Ian Hosek

Lid sinds: 20-01-10

375 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 3-18, Maness Winter 2010 Lid van Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 25

Altijd: 8,489