Inleiding
This guide is intended for those who have a malfunctioning Flash or broken/cracked Flash Cover on their Polaroid SNAP.
Wat je nodig hebt
-
-
Open the paper door of the camera, then locate and remove the screws that are on the top and bottom edge of the inside of the camera.
-
Screw head: Phillips, Screw length: 3mm
-
-
-
-
Flip the front face-plate over, so that you’re are looking at the silver plate on the inside.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.