Repareer je spullen Gemeenschap Winkel

Polar M400 Watch Wrist Strap Replacement

Inleiding

This guide will teach someone how to take off a damaged or torn wrist strap on the Polar M400 and replace it with a new one. A damaged wrist strap could be due to excessive wear and tear or wearing it in wet conditions.

Wat je nodig hebt

  1. Polar M400 Watch Wrist Strap Replacement, Wrist Strap: stap 1, afbeelding 1 van 1

    • Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.

    Vertaal

  3. Polar M400 Watch Wrist Strap Replacement: stap 2, afbeelding 1 van 2 Polar M400 Watch Wrist Strap Replacement: stap 2, afbeelding 2 van 2

    • Apply an upward pressure to the holes until the locking pins release.

    • Use precision tweezers to remove the pins that connect the face with the strap.

    Vertaal

  4. Polar M400 Watch Wrist Strap Replacement: stap 3, afbeelding 1 van 1

    • Once the pins are released, the old wrist strap should snap off.

    • Simply lock the new wrist strap into place.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Timothy Rocha

Lid sinds: 09/28/17

392 Reputatie

1 Handleiding geschreven

Medailles: 8

+5 andere badges

Team

University of Maine, Team S1-G3, Diaz Fall 2017 Lid van University of Maine, Team S1-G3, Diaz Fall 2017

UMAINE-DIAZ-F17S1G3

4 Leden

7 handleidingen geschreven

2 opmerkingen

I am trying to do the same on my Polar v800 and I cannot remove the locking pins, they seem to be “stuck”, any idea how to loosen them?

Gustavo Fette - Antwoord

Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?

Olivier Grand - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 50

Altijd: 9,406