Ga door naar hoofdinhoud

Wat je nodig hebt

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: stap 1, afbeelding 1 van 1
    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

  2. PlayStation 3 Slim Top Cover Replacement: stap 2, afbeelding 1 van 2 PlayStation 3 Slim Top Cover Replacement: stap 2, afbeelding 2 van 2
    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

  3. PlayStation 3 Slim Top Cover Replacement: stap 3, afbeelding 1 van 1
    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

  4. PlayStation 3 Slim Top Cover Replacement: stap 4, afbeelding 1 van 1
    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

  5. PlayStation 3 Slim Top Cover Replacement: stap 5, afbeelding 1 van 2 PlayStation 3 Slim Top Cover Replacement: stap 5, afbeelding 2 van 2
    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

Conclusie

To reassemble your device, follow these instructions in reverse order.

90 andere personen hebben deze handleiding voltooid.

2 opmerkingen

No good mine a Sony.

james register - Antwoord

Thank you this helped me so much!!!!

Megan Davis - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 13

Afgelopen 7 dagen: 128

Afgelopen 30 dagen: 565

Altijd: 67,300