Ga door naar hoofdinhoud

PlayStation 3 Motherboard Assembly Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. PlayStation 3 Motherboard Assembly Replacement, Motherboard Assembly: stap 1, afbeelding 1 van 1
    • Pull the control board ribbon cable straight up and out of its socket on the motherboard.

  2. PlayStation 3 Motherboard Assembly Replacement: stap 2, afbeelding 1 van 2 PlayStation 3 Motherboard Assembly Replacement: stap 2, afbeelding 2 van 2
    • Remove the two 12 mm Phillips screws securing the control board to the lower case.

    • Remove the control board and its attached cable from the PS3.

  3. PlayStation 3 Motherboard Assembly Replacement: stap 3, afbeelding 1 van 1
    • Remove the following eight screws securing the motherboard assembly to the lower case:

    • Seven 12 mm Phillips screws (ph2)

    • One 30 mm Phillips screw

  4. PlayStation 3 Motherboard Assembly Replacement: stap 4, afbeelding 1 van 1
    • Remove the control board bracket.

  5. PlayStation 3 Motherboard Assembly Replacement: stap 5, afbeelding 1 van 2 PlayStation 3 Motherboard Assembly Replacement: stap 5, afbeelding 2 van 2
    • Use the flat end of a spudger to pry the hard drive bay cover away from the lower case.

    • Remove the hard drive bay cover.

  6. PlayStation 3 Motherboard Assembly Replacement: stap 6, afbeelding 1 van 1
    • Lift the motherboard assembly out of the lower case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 2,197