Repareer je spullen Gemeenschap Winkel

PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

Inleiding

Follow this guide to replace the power supply on your PlayStation 2 Slimline.

Wat je nodig hebt

  1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Lower Smart Plate: stap 1, afbeelding 1 van 1

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Vertaal

  2. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 2, afbeelding 1 van 1

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Vertaal

  3. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 3, afbeelding 1 van 1

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Vertaal

  5. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 4, afbeelding 1 van 2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 4, afbeelding 2 van 2

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Vertaal

  6. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 5, afbeelding 1 van 1

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Vertaal

  7. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 6, afbeelding 1 van 2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 6, afbeelding 2 van 2

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Vertaal

  8. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Power Supply: stap 7, afbeelding 1 van 1

    • Remove the Phillips screw from the power supply.

    Vertaal

  9. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: stap 8, afbeelding 1 van 1

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    Vertaal

    • Lift the power supply straight up and out of the PS2.

    Vertaal
Conclusie

To reassemble your device, follow the above steps in reverse order.

2 andere personen hebben deze handleiding voltooid.

Met dank aan deze vertalers:

de en

100%

MrJulian

shingle

Deze vertalers helpen ons de wereld te repareren! Wil je bijdragen?
Begin met vertalen ›

Auteur

met 1 andere bijdrager

MrJulian

Lid sinds: 10/22/20

1.543 Reputatie

7 handleidingen geschreven

Medailles: 18

+15 andere badges

Één opmerking

I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣

Memozit - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 87

Altijd: 671