Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

PlayStation 2 Slimline Fan Replacement

Wat je nodig hebt

  1. PlayStation 2 Slimline Fan Replacement, Outer Shell: stap 1, afbeelding 1 van 1
    • Disconnect all cables from the console and flip the unit over to reveal its base.

  2. PlayStation 2 Slimline Fan Replacement: stap 2, afbeelding 1 van 3 PlayStation 2 Slimline Fan Replacement: stap 2, afbeelding 2 van 3 PlayStation 2 Slimline Fan Replacement: stap 2, afbeelding 3 van 3
    • Locate the 6 feet on the base of the unit. Pry them off using a spudger to reveal the screws.

    • Note: One of the feet is located under the sticker shown in the photo. Removing this sticker will void any warranty with Sony.

  3. PlayStation 2 Slimline Fan Replacement: stap 3, afbeelding 1 van 3 PlayStation 2 Slimline Fan Replacement: stap 3, afbeelding 2 van 3 PlayStation 2 Slimline Fan Replacement: stap 3, afbeelding 3 van 3
    • Remove all six 4.0 mm screws from the base of the unit using a #1 Phillips screwdriver.

  4. PlayStation 2 Slimline Fan Replacement: stap 4, afbeelding 1 van 3 PlayStation 2 Slimline Fan Replacement: stap 4, afbeelding 2 van 3 PlayStation 2 Slimline Fan Replacement: stap 4, afbeelding 3 van 3
    • Starting at the corner at which the power and Ethernet ports are located, pry open the outer shell using a spudger and continue around the entire unit.

    • Note: You may use your hands for additional force to separate the two pieces of the outer shell.

  5. PlayStation 2 Slimline Fan Replacement, Fan: stap 5, afbeelding 1 van 2 PlayStation 2 Slimline Fan Replacement, Fan: stap 5, afbeelding 2 van 2
    • Locate the fan at the front, left section of the unit.

  6. PlayStation 2 Slimline Fan Replacement: stap 6, afbeelding 1 van 2 PlayStation 2 Slimline Fan Replacement: stap 6, afbeelding 2 van 2
    • Peel off the sticker holding the power cords to the unit.

  7. PlayStation 2 Slimline Fan Replacement: stap 7, afbeelding 1 van 2 PlayStation 2 Slimline Fan Replacement: stap 7, afbeelding 2 van 2
    • Lift the connector from the motherboard with a pair of tweezers using a firm, upward force.

  8. PlayStation 2 Slimline Fan Replacement: stap 8, afbeelding 1 van 3 PlayStation 2 Slimline Fan Replacement: stap 8, afbeelding 2 van 3 PlayStation 2 Slimline Fan Replacement: stap 8, afbeelding 3 van 3
    • Remove all three 1.6 mm screws fastening the fan to the unit using a #1 Phillips screwdriver.

    • Gently lift and remove the fan from its compartment.

Conclusie

To reassemble your device, follow these instructions in reverse order.

10 andere personen hebben deze handleiding voltooid.

Thomas Sullivan

Lid sinds: 10/23/13

3.900 Reputatie

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 80

Altijd: 8,233