Inleiding

The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

  1. Ensure the headset is in the base's cradle.
    • Ensure the headset is in the base's cradle.

  2. Press the volume control buttons on the back of the base until the front of the base flashes red.
    • Press the volume control buttons on the back of the base until the front of the base flashes red.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Press the mute switch on top of the headset until the green light on the headset turns on.
    • Press the mute switch on top of the headset until the green light on the headset turns on.

  5. Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord. Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.
    • Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

  6. When the flashing red light becomes solid, synchronization is complete.
    • When the flashing red light becomes solid, synchronization is complete.

Eindstreep

2 andere personen hebben deze handleiding voltooid.

Joe

Lid sinds: 12-04-12

91 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 17-29, Amido Spring 2012 Lid van Cal Poly, Team 17-29, Amido Spring 2012

CPSU-AMIDO-S12S17G29

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 1,663