Inleiding

Use this guide to replace your base unit's motherboard.

Onderdelen

Geen onderdelen nodig.

Flip over the base unit to reveal the bottom. Flip over the base unit to reveal the bottom.
  • Flip over the base unit to reveal the bottom.

Voeg opmerking toe

Using a #0 screwdriver, remove the two 2.50mm screws. Using a #0 screwdriver, remove the two 2.50mm screws.
  • Using a #0 screwdriver, remove the two 2.50mm screws.

Voeg opmerking toe

Mac RAM Kits
Versnel je Mac. Breid zijn geheugen uit.
Mac RAM Kits
Haal meer megabytes uit je Mac.
Separate, but do not remove, the silver upper piece from the dark lower piece. Carefully disconnect the wires from the motherboard. Remove the silver top of the base.
  • Separate, but do not remove, the silver upper piece from the dark lower piece.

  • Carefully disconnect the wires from the motherboard.

  • Remove the silver top of the base.

Voeg opmerking toe

Remove the motherboard from the base Remove the motherboard from the base Remove the motherboard from the base
  • Remove the motherboard from the base

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Bryan Clark

Lid sinds: 12-04-12

37 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 17-29, Amido Spring 2012 Lid van Cal Poly, Team 17-29, Amido Spring 2012

CPSU-AMIDO-S12S17G29

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 12

Altijd: 586