Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.
Inleiding
This guide will show you the steps to remove the aluminum plates.
Wat je nodig hebt
-
-
Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.
-
-
-
-
While holding the base of the ear cup with one hand, insert your index finger from your other hand into the inside of the foam ear piece.
-
-
-
Remove the three screws located on the driver cover of the ear cup with the PH0 Phillips screw driver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.