Ga door naar hoofdinhoud

Photive Rain Speaker Replacement

Wat je nodig hebt

  1. Photive Rain Speaker Replacement, Back Panel: stap 1, afbeelding 1 van 1
    • Turn the speaker off before disassembling.

    • Remove the suction cup from its groove by twisting and turning it.

  2. Photive Rain Speaker Replacement: stap 2, afbeelding 1 van 1
    • Remove the four 8.5 mm screws from the back panel of the speaker by using the Phillips #1 Screwdriver.

    • Remove back panel

  3. Photive Rain Speaker Replacement, Speaker: stap 3, afbeelding 1 van 1
    • Carefully remove the front panel from the device.

  4. Photive Rain Speaker Replacement: stap 4, afbeelding 1 van 1
    • Detach the connector clips from the motherboard using the iFixit Opening Tool.

    • Some force may be necessary to remove the plastic clips.

  5. Photive Rain Speaker Replacement: stap 5, afbeelding 1 van 2 Photive Rain Speaker Replacement: stap 5, afbeelding 2 van 2
    • After the speaker is detached, remove the two 8.5mm screws that hold the speaker to the front panel with a Phillips #1 screwdriver.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

abcdef ghijk

Lid sinds: 02/15/16

723 Reputatie

4 handleidingen geschreven

Team

IUPUI, Team 1-4, Harley Spring 2016 Lid van IUPUI, Team 1-4, Harley Spring 2016

IUPUI-HARLEY-S16S1G4

3 Leden

4 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 290