Skip to main content

Inleiding

If the beard comb does not move, there may be a problem with the inside of the zoom lock ring, and the zoom lock precision notch may need to be replaced. Follow this guide to replace the zoom lock precision notch.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the comb from the top of the trimmer.
    • Remove the comb from the top of the trimmer.

  2. Place your thumb underneath the blade and push upward to remove it. Place your thumb underneath the blade and push upward to remove it.
    • Place your thumb underneath the blade and push upward to remove it.

  3. Hold trimmer towards you as shown in the diagram. Insert your prying tool/metal spudger into the marked area.
    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

  4. Apply gentle pressure and begin prying open the back panel. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release.
    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

  5. Android Fix Kits

    Slechts één reparatie scheidt jou van een nieuw scherm of een nieuwe batterij.

    Nu winkelen

    Android Fix Kits

    Slechts één reparatie scheidt jou van een nieuw scherm of een nieuwe batterij.

    Nu winkelen
  6. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the wires attached to the battery off of the power connectors before completely removing the back panel. Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

  7. Hold the trimmer towards you. Place the metal spudger tool in the marked area.
    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

  8. Apply gentle pressure and begin prying the front panel.
    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

  9. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the trimmer apart using your hands once the panel is at least halfway apart.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

  10. Locate the zoom lock precision notch in the back panel of the Beardtrimmer
    • Locate the zoom lock precision notch in the back panel of the Beardtrimmer

  11. Set the zoom lock wheel to the lowest setting
    • Set the zoom lock wheel to the lowest setting

  12. Rotate the trimmer so that the motor is facing you. Now gently push down the zoom lock wheel until the white button is not showing.
    • Rotate the trimmer so that the motor is facing you.

    • Now gently push down the zoom lock wheel until the white button is not showing.

  13. Rotate the beardtrimmer again so that the battery is facing you. With the help of the metal spudger, apply gentle pressure on top of the wheel to remove the zoom lock precision notch . With the help of the metal spudger, apply gentle pressure on top of the wheel to remove the zoom lock precision notch .
    • Rotate the beardtrimmer again so that the battery is facing you.

    • With the help of the metal spudger, apply gentle pressure on top of the wheel to remove the zoom lock precision notch .

Conclusie

To reassemble your device, follow these instructions in reverse order.

ilan

Lid sinds: 03-09-15

161 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 15-2, Blackwell Fall 2015 Lid van USF Tampa, Team 15-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G2

4 Leden

6 handleidingen geschreven

Voeg een opmerking toe

Bekijk statistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 11

Aller tijden: 3,266