Ga door naar hoofdinhoud

Inleiding

When the battery dies completely and no longer holds a charge, this guide will illustrate the proper way of removing the battery for replacement. CAUTION. Please do not throw away the dead battery in the trash. See a proper disposal center for any handling of dead batteries.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the comb from the top of the trimmer.
    • Remove the comb from the top of the trimmer.

  2. Place your thumb underneath the blade and push upward to remove it. Place your thumb underneath the blade and push upward to remove it.
    • Place your thumb underneath the blade and push upward to remove it.

  3. Hold trimmer towards you as shown in the diagram. Insert your prying tool/metal spudger into the marked area.
    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

  4. Apply gentle pressure and begin prying open the back panel. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release.
    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

  5. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  6. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the wires attached to the battery off of the power connectors before completely removing the back panel. Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

  7. Hold the trimmer towards you. Place the metal spudger tool in the marked area.
    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

  8. Apply gentle pressure and begin prying the front panel.
    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

  9. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the trimmer apart using your hands once the panel is at least halfway apart.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

  10. Face the battery towards you. Locate the power connectors on the bottom of the trimmer, pull them from the base with your spudger. Locate the power connectors on the bottom of the trimmer, pull them from the base with your spudger.
    • Face the battery towards you.

    • Locate the power connectors on the bottom of the trimmer, pull them from the base with your spudger.

  11. Grab the battery by its sides, pull it upwards out of the base of the trimmer.
    • Grab the battery by its sides, pull it upwards out of the base of the trimmer.

  12. Locate the connection between the blue wire and the battery.  Melt the solder and completely remove the battery. Be careful when dealing with solder.  The metals will become very hot and can cause damage to skin/clothing.
    • Locate the connection between the blue wire and the battery. Melt the solder and completely remove the battery.

    • Be careful when dealing with solder. The metals will become very hot and can cause damage to skin/clothing.

    what power does this battery hold

    Shubham Sharma - Antwoord

    Would be nice to have some specs for the battery here so we can buy a replacement before we open it up.

    James Almeida - Antwoord

    Looks like a triple A NiMH battery, I'm going to try and replace it with a Sanyo Eneloop pre soldered battery tip.

    Maher Salti - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

20 andere personen hebben deze handleiding voltooid.

Darren Chu

Lid sinds: 03-09-15

1.250 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team 15-2, Blackwell Fall 2015 Lid van USF Tampa, Team 15-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G2

4 Leden

6 handleidingen geschreven

Hi, what are the specs on the NiMh battery?

Eric Nguyen - Antwoord

NiMh AA 1650 mAh 1.2V rechargeable battery. Search Amazon.com for philips norelco qt4022 battery. One result is UPC 737212062822

galligant -

I think you can simply use a AA battery, 1.2V

Olivier Lefaux - Antwoord

Note: AA Alkaline battery is 1.5V and not rechargeable.

galligant -

Awesome work.very helpful

Himanshu sahrma - Antwoord

can I use the electric adapter in place of battery?

Avijeet60 - Antwoord

Hey!! Whats the mah of battery??

ashish - Antwoord

HI Darren,

I’ve to say this is a cool work. You’ve done an extra-ordinary support for Philiphs Norelco users. As a beard style lover I’s thinking of buying a new Philips one instead of my old remington MB320C. I have already visited online websites like https://trendyseekers.com/best-beard-tri... to learn different model - Panasonic ER -GB 40s, Bruan BT 5070 and more. I have also seen philips norelco beard trimmer 3100. online. But I was curious about blade replacement and battery durability, charge capacity and of course battery replacement. My pleasure I found your post link on the fist page of google; simply hit on and discover your brilliant post. The 3 lines introduction has made a long expression to understand I do think. All the 11 steps you mentioned with nice images really amazing and useful for the users. I would love to say thanks for your awesome work and will be highly appreciated if you let me know how long does the charge remain after a single charging please.

Randy G

Randy Gardner - Antwoord

The battery I took out of my QT4000 is EXACTLY the size of a TRIPLE A (AAA) battery - a bit shorter than a AA and much smaller diameter.

jdenny - Antwoord

My battery is not charging(the indicator on charger doesnt glow).

I tried other chargers also.

What should I do?

if not repairable, can i charge the battery by removing it?

Sanku - Antwoord

Great tutorial. Saved me $75.

Removing the cover is a bit of a PITA.

Rather than ordering one from Amazon, I just used an existing Energizer AAA rechargable battery. It holds2300 mAh vs the 1650 mAh of a similar 1.2v battery on Amazon.

I tore off the metal tabs from the existing battery and soldered the tabs to ends of my AAA battery with solder and flux.

Curtis Patrick - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 23

Afgelopen 7 Dagen: 192

Afgelopen 30 Dagen: 737

Altijd: 34,227