Inleiding

With constant use, the USB port can become broken or unresponsive. This guide will show you how to replace the USB port on your Philips DVP5992-F7.

Onderdelen

Geen onderdelen nodig.

  1. Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Remove the top plate of the DVD by firmly grasping the player on both sides.
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

    • Locate the bundled cable connectors that attaches the USB port to the motherboard.

    • Firmly grasp the bundled cable connector and lift it from the motherboard.

    • Locate the area behind the USB port within the interior of the DVD Player.

    • Unscrew the two 6.35 mm Phillips #1 screws located behind the USB port.

    • Use the plastic opening tool to press down on the brass clip that holds the USB port in place.

    • Pull back the USB Port to remove it from the DVD player.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nathan Sarti

Lid sinds: 31-08-18

253 Reputatie

2 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 33

Altijd: 47