Ga door naar hoofdinhoud

Pentax Optio WG-3 GPS Lens Assembly Replacement

Wat je nodig hebt

  1. Pentax Optio WG-3 GPS Lens Assembly  Replacement, Lens Assembly: stap 1, afbeelding 1 van 1
    • Turn over the camera so the screen is facing up.

    • Remove the four 5 mm Phillips #000 screws that secure the outer cover.

  2. Pentax Optio WG-3 GPS Lens Assembly  Replacement: stap 2, afbeelding 1 van 1
    • Flip over the camera so the bottom is facing up.

    • Remove the single Phillips #000 screw.

    • Remove the cover.

  3. Pentax Optio WG-3 GPS Lens Assembly  Replacement: stap 3, afbeelding 1 van 1
    • Remove the eight 5 mm Phillips #000 screws holding the circuitry together.

  4. Pentax Optio WG-3 GPS Lens Assembly  Replacement: stap 4, afbeelding 1 van 1
    • Carefully remove the circuitry.

  5. Pentax Optio WG-3 GPS Lens Assembly  Replacement: stap 5, afbeelding 1 van 1
    • Flip the circuitry so that the lens is facing up and the flash component is on your right.

    • Identify the orange ribbon tape surrounding the lens.

  6. Pentax Optio WG-3 GPS Lens Assembly  Replacement: stap 6, afbeelding 1 van 1
    • There are three 5 mm Phillips #000 screws to be removed on the right side of the lens.

  7. Pentax Optio WG-3 GPS Lens Assembly  Replacement: stap 7, afbeelding 1 van 1
    • Gently slide the lens piece to the right, remove the tape and take it out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Garrett Rose

Lid sinds: 03/31/22

373 Reputatie

2 handleidingen geschreven

Team

IUPUI, Team 3-1, Harley Spring 2022 Lid van IUPUI, Team 3-1, Harley Spring 2022

IUPUI-HARLEY-S22S3G1

3 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 5

Altijd: 183