Repareer je spullen Gemeenschap Winkel

Patch your Patagonia Nano Puff ® Jacket with Repair Tape

Inleiding

Patagonia Nano Puff ® Jackets have a wonderfully soft feel and a pampering warmth which means we want to wear them for everything we do. Unfortunately, sometimes they get ripped or torn by a sharp object like snowboard edges or gnarly brush. While patching your jacket with repair tape will hold for a while, and is a great way to repair when you’re on-the-fly, eventually you’ll want to put a real patch on the jacket. For details on patching a Patagonia down jacket check out our Baffle Repair Guide.

For replacement parts or further assistance, contact Patagonia Customer Service.

Wat je nodig hebt

  1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape, Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 1, afbeelding 1 van 1

    • Inspect the damage on your jacket. Clip any dangling threads or fabric using small scissors.

    Vertaal

  2. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 2, afbeelding 1 van 3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 2, afbeelding 2 van 3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 2, afbeelding 3 van 3

    • Grab your repair tape.

    • Flip the repair tape to the back side.

    • Using a permanent marker, draw an oval slightly larger than the hole.

    • If you have a wide hole, you can use a rectangle, but be sure to round the edges. Rounding the edges prevents the corners from getting caught and peeling up.

    Vertaal

  4. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 3, afbeelding 1 van 2 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 3, afbeelding 2 van 2

    • Cut out your shape using scissors.

    Vertaal

  5. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 4, afbeelding 1 van 3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 4, afbeelding 2 van 3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 4, afbeelding 3 van 3

    • Using your fingernail, or a pin, peel the backing off the tenacious tape, so that you only have the clear sticky layer.

    • Be sure not to touch the sticky side of the tape as this will gum up the tape and it won’t stick well.

    Vertaal

  6. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 5, afbeelding 1 van 2 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 5, afbeelding 2 van 2

    • Lay the tape over the hole and press the tape down with your finger.

    Vertaal

  7. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 6, afbeelding 1 van 2 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: stap 6, afbeelding 2 van 2

    • Use a fingernail or spudger to work out all of the air bubbles under the tape. Continue rubbing the tape until it is well-adhered.

    Vertaal
Eindstreep

9 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Brittany McCrigler

Lid sinds: 03/05/12

89.011 Reputatie

131 handleidingen geschreven

Medailles: 48

+45 andere badges

Team

iFixit Lid van iFixit

Staff

135 Leden

16.732 handleidingen geschreven

2 opmerkingen

I followed this tutorial and used Tenacious tape by Gear Aid because it claims to not leave a residue behind if removed. That was a bad idea. I am now ready to upgrade this patch to a sewn one and removing the tape is absolutely leaving behind a residue. Really annoyed right now.

Ling Wang - Antwoord

This is really helpful, thanks.

James

James Riley - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 32

Afgelopen 30 dagen: 162

Altijd: 45,274