Menu

Jouw instellingen

Pandigital Super Nova Battery Replacement

Geschreven door: pfcprice (en 6 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Gemiddeld

Stappen

5

Tijd vereist

5 - 10 minuten

Secties

1

Markeringen

0

Inleiding

This guide demonstrates how to remove and replace a Pandigital Super Nova battery and preserve the function of your device.

  1. Remove the screw covers from each corner of the back side of the device.

    • Remove the screw covers from each corner of the back side of the device.

    • Set aside.

    Bewerken

  2. Using a Philips screwdriver, remove all four .15 mm screws from each corner. Set aside.

    • Using a Philips screwdriver, remove all four .15 mm screws from each corner.

    • Set aside.

    Bewerken

  4. Using the plastic opening tool, remove the back cover of the device.

    • Using the plastic opening tool, remove the back cover of the device.

    Bewerken

  5. Remove the three .11 mm screws that hold the battery in place.

    • Remove the three .11 mm screws that hold the battery in place.

    • Set aside.

    Bewerken

  6. Unplug the battery and remove from device. Avoid touching the motherboard as it is fragile.

    • Unplug the battery and remove from device.

    • Avoid touching the motherboard as it is fragile.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 6 andere bijdragers

pfcprice

Lid sinds: 10-10-16

101 Reputatie

1 Handleiding geschreven

Badges: 4

+1 extra badge

Team

Texas Tech, Team 1-2, Bennett Fall 2016 Lid van Texas Tech, Team 1-2, Bennett Fall 2016

TTU-BENNETT-F16S1G2

4 Leden

6 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 187