Inleiding

This guide will show you how to add or replace the RAM in your Toughbook CF-29.

Onderdelen

Geen onderdelen nodig.

Locate the bay door for the battery on the left side of the laptop.
  • Locate the bay door for the battery on the left side of the laptop.

Voeg opmerking toe

Slide the latch to the right and then down to unlock it. Pull out the battery.
  • Slide the latch to the right and then down to unlock it.

  • Pull out the battery.

Voeg opmerking toe

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.
  • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

Voeg opmerking toe

Pull the clips aside to release and remove the RAM.
  • Pull the clips aside to release and remove the RAM.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Devon Augustus

Lid sinds: 12-04-10

97 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 27-93, Amido Spring 2010 Lid van Cal Poly, Team 27-93, Amido Spring 2010

CPSU-AMIDO-S10S27G93

4 Leden

12 handleidingen geschreven

Thanks for sharing this. I just bought a panasonic toughbook from http://buytough.com and I think this will come in handy. :)

Katie Sutton - Antwoord

there is another ram slot you failed to mention

sparkynaz - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 7

Altijd: 17,537