Inleiding

Use this guide to replace the camera's battery.

Onderdelen

Geen onderdelen nodig.

  1. Locate the small, hinged door on the bottom of the camera.
    • Locate the small, hinged door on the bottom of the camera.

  2. Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).
    • Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).

    • The hinged door should swing open after unlocking.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.
    • Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.

    • This should release the battery.

  5. Pull the battery out of the camera. The battery should slide out easily.
    • Pull the battery out of the camera.

    • The battery should slide out easily.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Juan Pablo Quinonez Weston

Lid sinds: 16-04-13

4 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 13-60, Johann Spring 2013 Lid van Cal Poly, Team 13-60, Johann Spring 2013

CPSU-JOHANN-S13S13G60

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 5

Altijd: 867