Ga door naar hoofdinhoud

Inleiding

This guide will show the user how to disassemble the camera to reach the Flash Top Assembly. Once the Flash Top Assembly is reached, the user can replace it.

Onderdelen

Geen onderdelen opgegeven.

  1. Locate the memory card and battery card latch on the bottom of the camera.
    • Locate the memory card and battery card latch on the bottom of the camera.

    • Slide the latch to the open position.

  2. Open the battery latch, and slide the battery release lever to the right.
    • Open the battery latch, and slide the battery release lever to the right.

  3. Remove the battery from the camera.
    • Remove the battery from the camera.

  4. Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.
    • Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.

    • Use this screwdriver for all screws in the device.

  5. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  6. Remove the 3.15 mm screw on the left side of the camera.
    • Remove the 3.15 mm screw on the left side of the camera.

  7. Remove the left side casing. Remove the left side casing.
    • Remove the left side casing.

  8. Remove the two 3.15 mm screws on the right side of the camera.
    • Remove the two 3.15 mm screws on the right side of the camera.

  9. Remove the bottom right panel.
    • Remove the bottom right panel.

  10. Gently remove the back casing. Start at the bottom and carefully pry towards the top to get this piece free.
    • Gently remove the back casing.

    • Start at the bottom and carefully pry towards the top to get this piece free.

  11. Carefully pry the Flash Top Assembly away from the top. Carefully pry the Flash Top Assembly away from the top.
    • Carefully pry the Flash Top Assembly away from the top.

  12. Replace the Flash Top Assembly with a new one. Replace the Flash Top Assembly with a new one.
    • Replace the Flash Top Assembly with a new one.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Caleb Fink

Lid sinds: 11-10-10

186 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 9-22, Regan Fall 2010 Lid van Cal Poly, Team 9-22, Regan Fall 2010

CPSU-REGAN-F10S9G22

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 3,544