Repareer je spullen Gemeenschap Winkel

Panasonic Lumix DMC-FH20 LCD Screen Replacement

Inleiding

If your LCD screen is broken, follow this guide to replace it. You will need special tools in order to complete this replacement. Refer to the tools to be sure of what you need.

Wat je nodig hebt

  1. Panasonic Lumix DMC-FH20 LCD Screen Replacement, LCD Screen: stap 1, afbeelding 1 van 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement, LCD Screen: stap 1, afbeelding 2 van 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement, LCD Screen: stap 1, afbeelding 3 van 3

    • Remove all screws (Phillips #000 head) from the sides and bottom of the camera.

    Bewerken

  2. Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 2, afbeelding 1 van 1

    • Remove the back panel. This might require some extra force. If you still can't get the panel off, try to use a plastic opening tool.

    Bewerken

  4. Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 3, afbeelding 1 van 2 Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 3, afbeelding 2 van 2

    • Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.

    Bewerken

  5. Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 4, afbeelding 1 van 2 Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 4, afbeelding 2 van 2

    • Remove the white plastic cover. This may take some extra force. You will want to try to remove from the bottom side first and peel up.

    • Then, where the silver switch is located, it will slide directly out at the top.

    Bewerken

  6. Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 5, afbeelding 1 van 1

    • Unscrew one screw (Phillips #000 head).

    Bewerken

  7. Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 6, afbeelding 1 van 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 6, afbeelding 2 van 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement: stap 6, afbeelding 3 van 3

    • You will want to use a plastic opening tool to complete this step. Pop the thin black piece of plastic upwards with the opening tool to unlock the plastic film ribbon.

    • Once unlocked, you will be able to pull the ribbon out and remove the screen completely.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Arianna Boushell

Lid sinds: 01/24/17

626 Reputatie

5 handleidingen geschreven

Medailles: 13

+10 andere badges

Team

Cal Poly, Team 10-7, Banghart Winter 2017 Lid van Cal Poly, Team 10-7, Banghart Winter 2017

CPSU-BANGHART-W17S10G7

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 12

Altijd: 546