Repareer je spullen

Recht op reparatie

Winkel

Panasonic Lumix DMC-F7 Back Case Replacement

Geschreven door: Alex Penman (en 13 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0
  • Voltooide reparaties: 1

Moeilijkheid

Gemiddeld

Stappen

8

Tijd vereist

Stel een tijd voor??

Secties

2

Markeringen

2

Inconsistent Images

Inconsistente plaatjes

Deze handleiding zou veel cooler worden met foto's zoals het hoort (zie vereisten).

Action Shots

Actiemomenten

Wees een actieheld! Deze handleiding heeft plaatjes nodig die beter tonen hoe specifieke handelingen uitgevoerd moeten worden.

Inleiding

Steps for removing the back half of the case and replacing it with a new one.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Slide the lock into the unlocked position to the right.

    • Slide the lock into the unlocked position to the right.

    • Use your finger to slide battery hatch towards the arrow sign.

    • Both battery and memory card should now be visible.

    Bewerken

  2. Open battery hatch and the black cover to expose the battery compartment.

    • Open battery hatch and the black cover to expose the battery compartment.

    • The camera used to create these repair guides did not have a battery and memory card.

    • Pull the battery out and replace with a new one.

    • When putting the battery back in, make sure it is in the same orientation as before.

    • Close the battery compartment and make sure the lock is in the locked position.

    Bewerken

  3. Remove the two 2.8 mm Phillips screws.

    • Remove the two 2.8 mm Phillips screws.

    Bewerken

  5. Use a Phillips screwdriver to remove the three 2.8 mm screws on the bottom of the camera.

    • Use a Phillips screwdriver to remove the three 2.8 mm screws on the bottom of the camera.

    Bewerken

  6. Remove the two 2.8 mm Phillips screws on the side of the camera as shown in picture.

    • Remove the two 2.8 mm Phillips screws on the side of the camera as shown in picture.

    Bewerken

  7. Use a spudger to pry open the case from all sides. Use a spudger to pry open the case from all sides.

    • Use a spudger to pry open the case from all sides.

    Bewerken

  8. Beware of the ribbon cable that is still attached when opening. Use your fingers to carefully pry off the back casing from the camera assembly.

    • Beware of the ribbon cable that is still attached when opening.

    • Use your fingers to carefully pry off the back casing from the camera assembly.

    Bewerken

  9. Lay the camera on its front side. Use the spudger to open the film strip locking mechanism and remove strip.

    • Lay the camera on its front side. Use the spudger to open the film strip locking mechanism and remove strip.

    • Hold down on the camera's metal casing with one hand. Use your other hand to completely lift the back case off the rest of the camera, making sure the film strip separates.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 13 andere bijdragers

Alex Penman

Lid sinds: 28-01-11

463 Reputatie

4 handleidingen geschreven

Badges: 9

+6 andere badges

Team

Cal Poly, Team 7-35, Regan Winter 2011 Lid van Cal Poly, Team 7-35, Regan Winter 2011

CPSU-REGAN-W11S7G35

4 Leden

10 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 755