Ga door naar hoofdinhoud

Wat je nodig hebt

  1. Panasonic Lumix DMC-F7 Back Case Replacement, Battery: stap 1, afbeelding 1 van 1
    • Slide the lock into the unlocked position to the right.

    • Use your finger to slide battery hatch towards the arrow sign.

    • Both battery and memory card should now be visible.

  2. Panasonic Lumix DMC-F7 Back Case Replacement: stap 2, afbeelding 1 van 1
    • Open battery hatch and the black cover to expose the battery compartment.

    • The camera used to create these repair guides did not have a battery and memory card.

    • Pull the battery out and replace with a new one.

    • When putting the battery back in, make sure it is in the same orientation as before.

    • Close the battery compartment and make sure the lock is in the locked position.

  3. Panasonic Lumix DMC-F7 Back Case Replacement, Back Case: stap 3, afbeelding 1 van 1
    • Remove the two 2.8 mm Phillips screws.

  4. Panasonic Lumix DMC-F7 Back Case Replacement: stap 4, afbeelding 1 van 1
    • Use a Phillips screwdriver to remove the three 2.8 mm screws on the bottom of the camera.

  5. Panasonic Lumix DMC-F7 Back Case Replacement: stap 5, afbeelding 1 van 1
    • Remove the two 2.8 mm Phillips screws on the side of the camera as shown in picture.

  6. Panasonic Lumix DMC-F7 Back Case Replacement: stap 6, afbeelding 1 van 2 Panasonic Lumix DMC-F7 Back Case Replacement: stap 6, afbeelding 2 van 2
    • Use a spudger to pry open the case from all sides.

  7. Panasonic Lumix DMC-F7 Back Case Replacement: stap 7, afbeelding 1 van 2 Panasonic Lumix DMC-F7 Back Case Replacement: stap 7, afbeelding 2 van 2
    • Beware of the ribbon cable that is still attached when opening.

    • Use your fingers to carefully pry off the back casing from the camera assembly.

  8. Panasonic Lumix DMC-F7 Back Case Replacement: stap 8, afbeelding 1 van 1
    • Lay the camera on its front side. Use the spudger to open the film strip locking mechanism and remove strip.

    • Hold down on the camera's metal casing with one hand. Use your other hand to completely lift the back case off the rest of the camera, making sure the film strip separates.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Alex Penman

Lid sinds: 28-01-11

463 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 7-35, Regan Winter 2011 Lid van Cal Poly, Team 7-35, Regan Winter 2011

CPSU-REGAN-W11S7G35

4 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 829