Inleiding

Follow this guide to access the antenna of the cell phone.

Onderdelen

Geen onderdelen nodig.

Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Voeg opmerking toe

Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Voeg opmerking toe

  • Remove the stylus from the phone/ Make this picture a close up by zooming in on the stylus.

Voeg opmerking toe

  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)/Use a T-5 Torx screwdriver to unscrew the 5 Torx screws./Make a close up of the screws.

Voeg opmerking toe

  • Using the spudger, remove the small rubberized patch under the antenna./Make a close up of this picture for this step as well by zooming in.

Voeg opmerking toe

  • Unscrew the last two screws using the same screw driver./ No edits necessary

Voeg opmerking toe

  • Using the plastic opening tool, carefully pry open the back case to loosen the antenna./Is the plastic opening tool something that comes with the phone? What exactly is this tool?

Voeg opmerking toe

  • Once the antenna is loose, pull the antenna out of the phone./edits are unnecessary

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

John Rainier Solanzo

Lid sinds: 17-04-12

4 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 12-37, Regan Spring 2012 Lid van Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 621