Inleiding

Replace the speaker

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
  • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

Voeg opmerking toe

Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
  • Use the T6 Torx Screwdriver to remove all 4 screws.

  • You have to first remove the Stylus to access the 4th screw.

Voeg opmerking toe

Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
  • Using a plastic opening tool, carefully separate the front and back cases.

  • Note: The antenna will detach from the phone.

Voeg opmerking toe

Using the spudger, pull the speaker straight up.
  • Using the spudger, pull the speaker straight up.

Voeg opmerking toe

Gently pull the rubber coating off of the speaker.
  • Gently pull the rubber coating off of the speaker.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Lid sinds: 26-01-10

24 Reputatie

14 handleidingen geschreven

Team

Cal Poly, Team 13-23, Maness Winter 2010 Lid van Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Leden

16 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,448