Ga door naar hoofdinhoud

Inleiding

Follow this guide if the battery is dysfunctional and you want to replace it.

Onderdelen

Geen onderdelen opgegeven.

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. Using metal tweezers, unplug small white plug. Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.
    • Using metal tweezers, unplug small white plug.

    • Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.

  5. Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.
    • Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.

    • The battery may be glued to the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Clement Poisson

Lid sinds: 26-01-10

24 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 13-23, Maness Winter 2010 Lid van Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Leden

16 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 7

Altijd: 4,991