Repareer je spullen

Recht op reparatie

Winkel

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Palm TX Back Panel Replacement

Geschreven door: Spencer Lewson (en 5 andere bijdragers)
  • Reacties: 0
  • Favorieten: 1
  • Voltooide reparaties: 1

Moeilijkheid

Gemiddeld

Stappen

5

Tijd vereist

5 - 8 minuten

Secties

1

Markeringen

0

Inleiding

Removing the back panel allows you to access the various parts of the Palm T|X PDA.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Orient the device so that the display faces forward. Remove the stylus from the right side.

    • Orient the device so that the display faces forward.

    • Remove the stylus from the right side.

    Bewerken

  2. Turn over the device so that the back panel faces forward.

    • Turn over the device so that the back panel faces forward.

    • Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

    Bewerken

  4. Rotate the device so that the display faces forward. Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

    • Rotate the device so that the display faces forward.

    • Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

    • Pry along the crevice to loosen the back panel.

    • Repeat this process for the right side.

    Bewerken

  5. Carefully pry the back panel to open the device. Be careful not to break the wire that connects the battery pack to the motherboard.

    • Carefully pry the back panel to open the device.

    • Be careful not to break the wire that connects the battery pack to the motherboard.

    • When reassembling, snap the back panel back into place and then insert the top cover.

    Bewerken

  6. Use a plastic opening tool to peel the battery pack from the back panel. The battery pack is glued to the back panel so removing it may require considerable effort.

    • Use a plastic opening tool to peel the battery pack from the back panel.

    • The battery pack is glued to the back panel so removing it may require considerable effort.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 5 andere bijdragers

Spencer Lewson

Lid sinds: 19-01-11

763 Reputatie

6 handleidingen geschreven

Badges: 12

+9 andere badges

Team

Cal Poly, Team 1-15, Amido Winter 2011 Lid van Cal Poly, Team 1-15, Amido Winter 2011

CPSU-AMIDO-W11S1G15

4 Leden

7 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 6

Altijd: 1,306