Ga door naar hoofdinhoud

Palm Pre 2 Motherboard Replacement

Wat je nodig hebt

  1. Palm Pre 2 Motherboard Replacement, Motherboard: stap 1, afbeelding 1 van 2 Palm Pre 2 Motherboard Replacement, Motherboard: stap 1, afbeelding 2 van 2
    • Make sure your Palm Pre 2 is turned off before taking apart the phone.

    • Snap off the back panel to reveal the battery using the opening tool.

  2. Palm Pre 2 Motherboard Replacement: stap 2, afbeelding 1 van 3 Palm Pre 2 Motherboard Replacement: stap 2, afbeelding 2 van 3 Palm Pre 2 Motherboard Replacement: stap 2, afbeelding 3 van 3
    • Pull on the tab to remove the battery.

  3. Palm Pre 2 Motherboard Replacement: stap 3, afbeelding 1 van 2 Palm Pre 2 Motherboard Replacement: stap 3, afbeelding 2 van 2
    • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

  4. Palm Pre 2 Motherboard Replacement: stap 4, afbeelding 1 van 2 Palm Pre 2 Motherboard Replacement: stap 4, afbeelding 2 van 2
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop
    • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas (Reference the red box in the image).

    • Use tweezers to remove the two antennas from the keypad control board.

  5. Palm Pre 2 Motherboard Replacement: stap 5, afbeelding 1 van 2 Palm Pre 2 Motherboard Replacement: stap 5, afbeelding 2 van 2
    • Use the opening tool to pry off the (black and yellow) back frame.

  6. Palm Pre 2 Motherboard Replacement: stap 6, afbeelding 1 van 3 Palm Pre 2 Motherboard Replacement: stap 6, afbeelding 2 van 3 Palm Pre 2 Motherboard Replacement: stap 6, afbeelding 3 van 3
    • Use the opening tool to remove the panel on the main part of the phone.

    • Use the tweezers to get access to remove the panel giving access to the cable connectors.

    • Remove the two ribbon cable connectors using the tweezers.

  7. Palm Pre 2 Motherboard Replacement: stap 7, afbeelding 1 van 1
    • Use tweezers to separate the keyboard from the phone.

  8. Palm Pre 2 Motherboard Replacement: stap 8, afbeelding 1 van 2 Palm Pre 2 Motherboard Replacement: stap 8, afbeelding 2 van 2
    • Use a Phillips #0 screwdriver to remove the remaining 4 screws from the main portion of the phone.

    • Use an opening tool to remove the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cole Simmerman

Lid sinds: 01/08/18

160 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S1-G6, Freund Spring 2018 Lid van IUPUI, Team S1-G6, Freund Spring 2018

IUPUI-FREUND-S18S1G6

2 Leden

4 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 11

Altijd: 266