Ga door naar hoofdinhoud

Palm P101UNA Speaker Replacement

Wat je nodig hebt

  1. Palm P101UNA Speaker Replacement, Battery: stap 1, afbeelding 1 van 1
    • Push in the button at the bottom of the phone, and lift the back cap off.

  2. Palm P101UNA Speaker Replacement: stap 2, afbeelding 1 van 1
    • Remove the battery by pulling out the little tab.

  3. Palm P101UNA Speaker Replacement, Speaker: stap 3, afbeelding 1 van 1
    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

  4. Palm P101UNA Speaker Replacement: stap 4, afbeelding 1 van 1
    • Using the spudger, remove the inner case from the phone.

  5. Palm P101UNA Speaker Replacement: stap 5, afbeelding 1 van 2 Palm P101UNA Speaker Replacement: stap 5, afbeelding 2 van 2
    • Unplug the wire from the speaker using the tweezers.

  6. Palm P101UNA Speaker Replacement: stap 6, afbeelding 1 van 1
    • Pry out the speaker from the back of the phone using tweezers.

    • Applying pressure from the back of the speaker may help.

Conclusie

To reassemble your device, follow these instructions in reverse order.

ironwill13791

Lid sinds: 10/30/13

509 Reputatie

5 handleidingen geschreven

Team

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 Lid van UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G2

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 205