Inleiding

This guide will teach you how to replace the flash bulb on the back of the phone.

  1. Push in the button at the bottom of the phone, and lift the back cap off.
    • Push in the button at the bottom of the phone, and lift the back cap off.

  2. Remove the battery by pulling out the little tab.
    • Remove the battery by pulling out the little tab.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.
    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

  5. Using the spudger, remove the inner case from the phone.
    • Using the spudger, remove the inner case from the phone.

  6. Using your spudger, slowly apply pressure on the bulb until it comes loose. Using your spudger, slowly apply pressure on the bulb until it comes loose.
    • Using your spudger, slowly apply pressure on the bulb until it comes loose.

Conclusie

To reassemble your device, follow these instructions in reverse order.

ironwill13791

Lid sinds: 30-10-13

509 Reputatie

5 handleidingen geschreven

Team

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 Lid van UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G2

3 Leden

10 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 137