Repareer je spullen Gemeenschap Winkel

PSP 300x Front Casing Replacement

Inleiding

Steps for replacing the outer casing of a Sony PSP-3000.

Wat je nodig hebt

  1. PSP 300x Front Casing Replacement, Battery: stap 1, afbeelding 1 van 3 PSP 300x Front Casing Replacement, Battery: stap 1, afbeelding 2 van 3 PSP 300x Front Casing Replacement, Battery: stap 1, afbeelding 3 van 3

    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

    Bewerken

  2. PSP 300x Front Casing Replacement, Front Casing: stap 2, afbeelding 1 van 1

    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

    Bewerken

  4. PSP 300x Front Casing Replacement: stap 3, afbeelding 1 van 2 PSP 300x Front Casing Replacement: stap 3, afbeelding 2 van 2

    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

    Bewerken

  5. PSP 300x Front Casing Replacement: stap 4, afbeelding 1 van 1

    • Next, unscrew the two screws located at the top of the PSP.

    Bewerken

  6. PSP 300x Front Casing Replacement: stap 5, afbeelding 1 van 1

    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

    Bewerken

  7. PSP 300x Front Casing Replacement: stap 6, afbeelding 1 van 2 PSP 300x Front Casing Replacement: stap 6, afbeelding 2 van 2

    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

28 andere personen hebben deze handleiding voltooid.

Auteur

met 16 andere bijdragers

kbrunner

Lid sinds: 11/05/09

81 Reputatie

1 Handleiding geschreven

Medailles: 11

+8 andere badges

Team

Cal Poly, Team 19-2, Maness Fall 2009 Lid van Cal Poly, Team 19-2, Maness Fall 2009

CPSU-MANESS-F09S19G2

3 Leden

12 handleidingen geschreven

Één opmerking

This is only the faceplate, not a casing replacement, come on

Dick - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 11

Afgelopen 7 dagen: 77

Afgelopen 30 dagen: 382

Altijd: 19,663