Inleiding

Steps for replacing the outer casing of a Sony PSP-3000.

  1. Place the PSP face down and locate the battery cover on the left side of the device.
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

    Voeg opmerking toe

  2. Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

    Voeg opmerking toe

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

      • Two are located behind the battery's warranty sticker.

      • Two are located on the right side of the PSP.

    Voeg opmerking toe

    • Next, unscrew the two screws located at the top of the PSP.

    Voeg opmerking toe

    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

    Voeg opmerking toe

    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

16 andere personen hebben deze handleiding voltooid.

kbrunner

Lid sinds: 05-11-09

32 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 19-2, Maness Fall 2009 Lid van Cal Poly, Team 19-2, Maness Fall 2009

CPSU-MANESS-F09S19G2

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 3

Afgelopen 7 Dagen: 17

Afgelopen 30 Dagen: 82

Altijd: 7,101