Repareer je spullen

Recht op reparatie

Winkel

PSP 1000 Front Casing Replacement

Geschreven door: Henry Lee (en 13 andere bijdragers)
  • Reacties: 6
  • Favorieten: 26
  • Voltooide reparaties: 28

Moeilijkheid

Eenvoudig

Stappen

6

Tijd vereist

10 minuten

Secties

2

Markeringen

0

Inleiding

This guide will show you how to remove the PSP's housing/frame.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Turn the PSP over so its back is facing you.

    • Turn the PSP over so its back is facing you.

    Bewerken

  2. Locate the battery casing button on the rear-left side of the PSP. Press down the button and remove the battery cover.

    • Locate the battery casing button on the rear-left side of the PSP.

    • Press down the button and remove the battery cover.

    Bewerken

  4. Using your finger, remove the battery upwards from the system as shown. Using your finger, remove the battery upwards from the system as shown.

    • Using your finger, remove the battery upwards from the system as shown.

    Bewerken

  5. Remove the four screws shown with a Phillips #00 screwdriver. You will have to peel back the guarantee sticker to access the screw on the lower left.

    • Remove the four screws shown with a Phillips #00 screwdriver.

    • You will have to peel back the guarantee sticker to access the screw on the lower left.

    Bewerken

    Much luck to you if you have a tiny, metal screwdriver like I did, the screws might be stuck in there and may require some force.

    Squib - Antwoord

    you need to peel back the warranty sticker in order to access both the lower left and lower left screws

    Frederick zzstu Geib - Antwoord

    This is a bit misleading, you should only remove the two black screws in the battery compartment. The silver ones can stay.

    Damian Cartwright - Antwoord

  6. Remove the screw from the bottom side of the PSP. Keep it separated from the rest of the screws.

    • Remove the screw from the bottom side of the PSP. Keep it separated from the rest of the screws.

    • Remove screws from back righthand side within the holes.

    Bewerken

  7. Gently separate the outer plastic casing from the rest of the system as shown. Gently separate the outer plastic casing from the rest of the system as shown.

    • Gently separate the outer plastic casing from the rest of the system as shown.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

28 andere personen hebben deze handleiding voltooid.

Auteur

met 13 andere bijdragers

Henry Lee

Lid sinds: 14-01-10

650 Reputatie

4 handleidingen geschreven

Badges: 13

+10 andere badges

Team

Cal Poly, Team 5-6, Forte Winter 2010 Lid van Cal Poly, Team 5-6, Forte Winter 2010

CPSU-FORTE-W10S5G6

5 Leden

14 handleidingen geschreven

3 Opmerkingen

Voeg een opmerking toe

Thank you! Awesome help!

Jay Vee - Antwoord

My psp is updating then psp is fallen down and battery comeout so please help me please thank you

Bye

National Nazeer - Antwoord

i also made a video on this for anyone who needs to do it that way.

https://www.youtube.com/watch?v=EIAaJyIx...

DAS Repair - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 46

Afgelopen 30 dagen: 256

Altijd: 30,316