Inleiding
The gear shaft is responsible for spinning the blades.
Wat je nodig hebt
-
-
Use the prying tools to open the four plastic screw holes on the bottom of the blender.
-
-
-
-
Remove the screw on top of the fan with the 4mm socket stock wrench.
-
Remove the fan and washer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.