Repareer je spullen Gemeenschap Winkel

Opening the Case

Inleiding

This guide will show you how to remove the cover on a OptiPlex 7020

    • Disconnect the computer and all attached devices from their electrical outlets

    • Disconnect any telephone, network, or USB cables from the computer

    • Before turning off the Computer please make sure that all Data is saved before powering off, If you do not save before powering off it may lead to data loss

    Bewerken

  3. Opening the Case, Removing the cover: stap 2, afbeelding 1 van 1

    • Locate the cover latch at the side of the chassis. Pull the cover latch upward

    • Pull the cover upward to a 45 degree angle and remove it from the system

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Jamie Chamberlain

Lid sinds: 06/11/22

514 Reputatie

2 handleidingen geschreven

Medailles: 7

+4 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 49

Altijd: 1,065