Onderdelen

Geen onderdelen nodig.

  1. Tool on left - PH000 screwdriver
    • Tool on left - PH000 screwdriver

    • Tool on right - iPod fix-it tool

    • Soldering Iron

  2. Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.
    • Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Locate the gray band that you removed the screws from; this holds the two halves of the camera together.  Use an iPod fix-it tool to pry the gray band loose and remove it. Locate the gray band that you removed the screws from; this holds the two halves of the camera together.  Use an iPod fix-it tool to pry the gray band loose and remove it.
    • Locate the gray band that you removed the screws from; this holds the two halves of the camera together. Use an iPod fix-it tool to pry the gray band loose and remove it.

  5. Use the iPod fix-it tool to separate the back panel from the camera.
    • Use the iPod fix-it tool to separate the back panel from the camera.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Travis Buck

Lid sinds: 25-09-12

107 Reputatie

2 handleidingen geschreven

Team

Ohio State, Team 1-2, Buehl Fall 2012 Lid van Ohio State, Team 1-2, Buehl Fall 2012

OSU-BUEHL-F12S1G2

3 Leden

3 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 629