Ga door naar hoofdinhoud

OnLogic CL100 mSATA SSD Replacement

Wat je nodig hebt

    • If there are rubber feet on the bottom of the device, remove the feet.

    • Remove the 4 screws on the bottom of the device.

    • After removing the orange pad, remove the screw holding the SSD in place and slide it right, then up.

    • While reassembling, align the SSD and slide it left.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

scx32

Lid sinds: 02/26/23

159 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 50