Ga door naar hoofdinhoud

Olympus Stylus Tough-6000 On/Off Button Replacement

Wat je nodig hebt

  1. Olympus Stylus Tough-6000 On/Off Button Replacement, Locate On/Off Button.: stap 1, afbeelding 1 van 1
    • First sit the camera on its bottom. You will be working on the on/off button.

  2. Olympus Stylus Tough-6000 On/Off Button Replacement: stap 2, afbeelding 1 van 1
    • Place camera upward.

    • You will notice two screws near the on/off button.

    • Use your Phillips #00 screwdriver to unscrew the two screws.

  3. Olympus Stylus Tough-6000 On/Off Button Replacement: stap 3, afbeelding 1 van 1
    • After unscrewing the two screws near the on/off button you will notice a single screw to your right.

    • Unscrew the single screw with your Phillips #00 screwdriver.

    • This will allow you to pry the panel off.

  4. Olympus Stylus Tough-6000 On/Off Button Replacement: stap 4, afbeelding 1 van 1
    • Grab your plastic opening tool and start prying off the panel.

  5. Olympus Stylus Tough-6000 On/Off Button Replacement: stap 5, afbeelding 1 van 1
    • Once the panel is lifted you will want to lift up the cover for the on/off button.

    • The actual on/off button is very small and loose so make sure to be careful with it!

  6. Olympus Stylus Tough-6000 On/Off Button Replacement: stap 6, afbeelding 1 van 1
    • You have reached the on/off button.

    • You can now replace it!

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Shannon Cooney

Lid sinds: 01/15/15

355 Reputatie

3 handleidingen geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 594