Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove nine 4.45mm Phillips #000 screws from the outside of the case. Remove nine 4.45mm Phillips #000 screws from the outside of the case.
    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

  2. There are four screws to take out on the bottom of the camera.
    • There are four screws to take out on the bottom of the camera.

  3. There are three screws to take out on this side.
    • There are three screws to take out on this side.

  4. There is one screw to take out on this side.
    • There is one screw to take out on this side.

  5. There is one hidden screw inside the HDMI port.
    • There is one hidden screw inside the HDMI port.

  6. Using the blue plastic opening tool, wedge open and remove the case.
    • Using the blue plastic opening tool, wedge open and remove the case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Samuel Hays

Lid sinds: 13-03-17

515 Reputatie

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 296